Enum mavlink::ualberta::FailureUnit

#[repr(u32)]
pub enum FailureUnit {
    FAILURE_UNIT_SENSOR_GYRO = 0,
    FAILURE_UNIT_SENSOR_ACCEL = 1,
    FAILURE_UNIT_SENSOR_MAG = 2,
    FAILURE_UNIT_SENSOR_BARO = 3,
    FAILURE_UNIT_SENSOR_GPS = 4,
    FAILURE_UNIT_SENSOR_OPTICAL_FLOW = 5,
    FAILURE_UNIT_SENSOR_VIO = 6,
    FAILURE_UNIT_SENSOR_DISTANCE_SENSOR = 7,
    FAILURE_UNIT_SENSOR_AIRSPEED = 8,
    FAILURE_UNIT_SYSTEM_BATTERY = 100,
    FAILURE_UNIT_SYSTEM_MOTOR = 101,
    FAILURE_UNIT_SYSTEM_SERVO = 102,
    FAILURE_UNIT_SYSTEM_AVOIDANCE = 103,
    FAILURE_UNIT_SYSTEM_RC_SIGNAL = 104,
    FAILURE_UNIT_SYSTEM_MAVLINK_SIGNAL = 105,
}

Available on crate feature ualberta only.

List of possible units where failures can be injected.

Variants

FAILURE_UNIT_SENSOR_GYRO = 0

FAILURE_UNIT_SENSOR_ACCEL = 1

FAILURE_UNIT_SENSOR_MAG = 2

FAILURE_UNIT_SENSOR_BARO = 3

FAILURE_UNIT_SENSOR_GPS = 4

FAILURE_UNIT_SENSOR_OPTICAL_FLOW = 5

FAILURE_UNIT_SENSOR_VIO = 6

FAILURE_UNIT_SENSOR_DISTANCE_SENSOR = 7

FAILURE_UNIT_SENSOR_AIRSPEED = 8

FAILURE_UNIT_SYSTEM_BATTERY = 100

FAILURE_UNIT_SYSTEM_MOTOR = 101

FAILURE_UNIT_SYSTEM_SERVO = 102

FAILURE_UNIT_SYSTEM_AVOIDANCE = 103

FAILURE_UNIT_SYSTEM_RC_SIGNAL = 104

FAILURE_UNIT_SYSTEM_MAVLINK_SIGNAL = 105

Implementations

impl FailureUnit

pub const DEFAULT: Self = Self::FAILURE_UNIT_SENSOR_GYRO

Trait Implementations

impl Clone for FailureUnit

fn clone(&self) -> FailureUnit

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for FailureUnit

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for FailureUnit

fn default() -> Self

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for FailureUnit

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl FromPrimitive for FailureUnit

fn from_i64(n: i64) -> Option<Self>

Converts an i64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u64(n: u64) -> Option<Self>

Converts an u64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_isize(n: isize) -> Option<Self>

Converts an isize to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i8(n: i8) -> Option<Self>

Converts an i8 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i16(n: i16) -> Option<Self>

Converts an i16 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i32(n: i32) -> Option<Self>

Converts an i32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i128(n: i128) -> Option<Self>

Converts an i128 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_usize(n: usize) -> Option<Self>

Converts a usize to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u8(n: u8) -> Option<Self>

Converts an u8 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u16(n: u16) -> Option<Self>

Converts an u16 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u32(n: u32) -> Option<Self>

Converts an u32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u128(n: u128) -> Option<Self>

Converts an u128 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_f32(n: f32) -> Option<Self>

Converts a f32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_f64(n: f64) -> Option<Self>

Converts a f64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

impl PartialEq for FailureUnit

fn eq(&self, other: &FailureUnit) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Serialize for FailureUnit

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl ToPrimitive for FailureUnit

fn to_i64(&self) -> Option<i64>

Converts the value of self to an i64. If the value cannot be represented by an i64, then None is returned.

fn to_u64(&self) -> Option<u64>

Converts the value of self to a u64. If the value cannot be represented by a u64, then None is returned.

fn to_isize(&self) -> Option<isize>

Converts the value of self to an isize. If the value cannot be represented by an isize, then None is returned.

fn to_i8(&self) -> Option<i8>

Converts the value of self to an i8. If the value cannot be represented by an i8, then None is returned.

fn to_i16(&self) -> Option<i16>

Converts the value of self to an i16. If the value cannot be represented by an i16, then None is returned.

fn to_i32(&self) -> Option<i32>

Converts the value of self to an i32. If the value cannot be represented by an i32, then None is returned.

fn to_i128(&self) -> Option<i128>

Converts the value of self to an i128. If the value cannot be represented by an i128 (i64 under the default implementation), then None is returned.

fn to_usize(&self) -> Option<usize>

Converts the value of self to a usize. If the value cannot be represented by a usize, then None is returned.

fn to_u8(&self) -> Option<u8>

Converts the value of self to a u8. If the value cannot be represented by a u8, then None is returned.

fn to_u16(&self) -> Option<u16>

Converts the value of self to a u16. If the value cannot be represented by a u16, then None is returned.

fn to_u32(&self) -> Option<u32>

Converts the value of self to a u32. If the value cannot be represented by a u32, then None is returned.

fn to_u128(&self) -> Option<u128>

Converts the value of self to a u128. If the value cannot be represented by a u128 (u64 under the default implementation), then None is returned.

fn to_f32(&self) -> Option<f32>

Converts the value of self to an f32. Overflows may map to positive or negative inifinity, otherwise None is returned if the value cannot be represented by an f32.

fn to_f64(&self) -> Option<f64>

Converts the value of self to an f64. Overflows may map to positive or negative inifinity, otherwise None is returned if the value cannot be represented by an f64.

impl Copy for FailureUnit

impl StructuralPartialEq for FailureUnit