Enum ActuatorConfiguration 

#[repr(u32)]
pub enum ActuatorConfiguration {
    ACTUATOR_CONFIGURATION_NONE = 0,
    ACTUATOR_CONFIGURATION_BEEP = 1,
    ACTUATOR_CONFIGURATION_3D_MODE_ON = 2,
    ACTUATOR_CONFIGURATION_3D_MODE_OFF = 3,
    ACTUATOR_CONFIGURATION_SPIN_DIRECTION1 = 4,
    ACTUATOR_CONFIGURATION_SPIN_DIRECTION2 = 5,
}

Available on crate feature ualberta only.

Actuator configuration, used to change a setting on an actuator. Component information metadata can be used to know which outputs support which commands.

Variants

ACTUATOR_CONFIGURATION_NONE = 0

Do nothing.

ACTUATOR_CONFIGURATION_BEEP = 1

Command the actuator to beep now.

ACTUATOR_CONFIGURATION_3D_MODE_ON = 2

Permanently set the actuator (ESC) to 3D mode (reversible thrust).

ACTUATOR_CONFIGURATION_3D_MODE_OFF = 3

Permanently set the actuator (ESC) to non 3D mode (non-reversible thrust).

ACTUATOR_CONFIGURATION_SPIN_DIRECTION1 = 4

Permanently set the actuator (ESC) to spin direction 1 (which can be clockwise or counter-clockwise).

ACTUATOR_CONFIGURATION_SPIN_DIRECTION2 = 5

Permanently set the actuator (ESC) to spin direction 2 (opposite of direction 1).

Implementations

impl ActuatorConfiguration

pub const DEFAULT: Self = Self::ACTUATOR_CONFIGURATION_NONE

Trait Implementations

impl Clone for ActuatorConfiguration

fn clone(&self) -> ActuatorConfiguration

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ActuatorConfiguration

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for ActuatorConfiguration

fn default() -> Self

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for ActuatorConfiguration

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl FromPrimitive for ActuatorConfiguration

fn from_i64(n: i64) -> Option<Self>

Converts an i64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u64(n: u64) -> Option<Self>

Converts an u64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_isize(n: isize) -> Option<Self>

Converts an isize to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i8(n: i8) -> Option<Self>

Converts an i8 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i16(n: i16) -> Option<Self>

Converts an i16 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i32(n: i32) -> Option<Self>

Converts an i32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i128(n: i128) -> Option<Self>

Converts an i128 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_usize(n: usize) -> Option<Self>

Converts a usize to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u8(n: u8) -> Option<Self>

Converts an u8 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u16(n: u16) -> Option<Self>

Converts an u16 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u32(n: u32) -> Option<Self>

Converts an u32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u128(n: u128) -> Option<Self>

Converts an u128 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_f32(n: f32) -> Option<Self>

Converts a f32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_f64(n: f64) -> Option<Self>

Converts a f64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

impl PartialEq for ActuatorConfiguration

fn eq(&self, other: &ActuatorConfiguration) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Serialize for ActuatorConfiguration

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl ToPrimitive for ActuatorConfiguration

fn to_i64(&self) -> Option<i64>

Converts the value of self to an i64. If the value cannot be represented by an i64, then None is returned.

fn to_u64(&self) -> Option<u64>

Converts the value of self to a u64. If the value cannot be represented by a u64, then None is returned.

fn to_isize(&self) -> Option<isize>

Converts the value of self to an isize. If the value cannot be represented by an isize, then None is returned.

fn to_i8(&self) -> Option<i8>

Converts the value of self to an i8. If the value cannot be represented by an i8, then None is returned.

fn to_i16(&self) -> Option<i16>

Converts the value of self to an i16. If the value cannot be represented by an i16, then None is returned.

fn to_i32(&self) -> Option<i32>

Converts the value of self to an i32. If the value cannot be represented by an i32, then None is returned.

fn to_i128(&self) -> Option<i128>

Converts the value of self to an i128. If the value cannot be represented by an i128 (i64 under the default implementation), then None is returned.

fn to_usize(&self) -> Option<usize>

Converts the value of self to a usize. If the value cannot be represented by a usize, then None is returned.

fn to_u8(&self) -> Option<u8>

Converts the value of self to a u8. If the value cannot be represented by a u8, then None is returned.

fn to_u16(&self) -> Option<u16>

Converts the value of self to a u16. If the value cannot be represented by a u16, then None is returned.

fn to_u32(&self) -> Option<u32>

Converts the value of self to a u32. If the value cannot be represented by a u32, then None is returned.

fn to_u128(&self) -> Option<u128>

Converts the value of self to a u128. If the value cannot be represented by a u128 (u64 under the default implementation), then None is returned.

fn to_f32(&self) -> Option<f32>

Converts the value of self to an f32. Overflows may map to positive or negative inifinity, otherwise None is returned if the value cannot be represented by an f32.

fn to_f64(&self) -> Option<f64>

Converts the value of self to an f64. Overflows may map to positive or negative inifinity, otherwise None is returned if the value cannot be represented by an f64.

impl Copy for ActuatorConfiguration

impl StructuralPartialEq for ActuatorConfiguration