pub struct CameraTrackingTargetData { /* private fields */ }
storm32
only.Expand description
Camera tracking target data (shows where tracked target is within image)
Implementations§
Source§impl CameraTrackingTargetData
impl CameraTrackingTargetData
Sourcepub const CAMERA_TRACKING_TARGET_DATA_EMBEDDED: Self
pub const CAMERA_TRACKING_TARGET_DATA_EMBEDDED: Self
Target data embedded in image data (proprietary)
Sourcepub const CAMERA_TRACKING_TARGET_DATA_RENDERED: Self
pub const CAMERA_TRACKING_TARGET_DATA_RENDERED: Self
Target data rendered in image
Sourcepub const CAMERA_TRACKING_TARGET_DATA_IN_STATUS: Self
pub const CAMERA_TRACKING_TARGET_DATA_IN_STATUS: Self
Target data within status message (Point or Rectangle)
Sourcepub const fn from_bits(bits: u8) -> Option<Self>
pub const fn from_bits(bits: u8) -> Option<Self>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
Sourcepub const fn from_bits_truncate(bits: u8) -> Self
pub const fn from_bits_truncate(bits: u8) -> Self
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
Sourcepub const unsafe fn from_bits_unchecked(bits: u8) -> Self
pub const unsafe fn from_bits_unchecked(bits: u8) -> Self
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
§Safety
The caller of the bitflags!
macro can chose to allow or
disallow extra bits for their bitflags type.
The caller of from_bits_unchecked()
has to ensure that
all bits correspond to a defined flag or that extra bits
are valid for this bitflags type.
Sourcepub const fn intersects(&self, other: Self) -> bool
pub const fn intersects(&self, other: Self) -> bool
Returns true
if there are flags common to both self
and other
.
Sourcepub const fn contains(&self, other: Self) -> bool
pub const fn contains(&self, other: Self) -> bool
Returns true
if all of the flags in other
are contained within self
.
Sourcepub fn set(&mut self, other: Self, value: bool)
pub fn set(&mut self, other: Self, value: bool)
Inserts or removes the specified flags depending on the passed value.
Sourcepub const fn intersection(self, other: Self) -> Self
pub const fn intersection(self, other: Self) -> Self
Returns the intersection between the flags in self
and
other
.
Specifically, the returned set contains only the flags which are
present in both self
and other
.
This is equivalent to using the &
operator (e.g.
ops::BitAnd
), as in flags & other
.
Sourcepub const fn union(self, other: Self) -> Self
pub const fn union(self, other: Self) -> Self
Returns the union of between the flags in self
and other
.
Specifically, the returned set contains all flags which are
present in either self
or other
, including any which are
present in both (see Self::symmetric_difference
if that
is undesirable).
This is equivalent to using the |
operator (e.g.
ops::BitOr
), as in flags | other
.
Sourcepub const fn difference(self, other: Self) -> Self
pub const fn difference(self, other: Self) -> Self
Returns the difference between the flags in self
and other
.
Specifically, the returned set contains all flags present in
self
, except for the ones present in other
.
It is also conceptually equivalent to the “bit-clear” operation:
flags & !other
(and this syntax is also supported).
This is equivalent to using the -
operator (e.g.
ops::Sub
), as in flags - other
.
Sourcepub const fn symmetric_difference(self, other: Self) -> Self
pub const fn symmetric_difference(self, other: Self) -> Self
Returns the symmetric difference between the flags
in self
and other
.
Specifically, the returned set contains the flags present which
are present in self
or other
, but that are not present in
both. Equivalently, it contains the flags present in exactly
one of the sets self
and other
.
This is equivalent to using the ^
operator (e.g.
ops::BitXor
), as in flags ^ other
.
Sourcepub const fn complement(self) -> Self
pub const fn complement(self) -> Self
Returns the complement of this set of flags.
Specifically, the returned set contains all the flags which are
not set in self
, but which are allowed for this type.
Alternatively, it can be thought of as the set difference
between Self::all()
and self
(e.g. Self::all() - self
)
This is equivalent to using the !
operator (e.g.
ops::Not
), as in !flags
.
Trait Implementations§
Source§impl Binary for CameraTrackingTargetData
impl Binary for CameraTrackingTargetData
Source§impl BitAnd for CameraTrackingTargetData
impl BitAnd for CameraTrackingTargetData
Source§impl BitAndAssign for CameraTrackingTargetData
impl BitAndAssign for CameraTrackingTargetData
Source§fn bitand_assign(&mut self, other: Self)
fn bitand_assign(&mut self, other: Self)
Disables all flags disabled in the set.
Source§impl BitOr for CameraTrackingTargetData
impl BitOr for CameraTrackingTargetData
Source§fn bitor(self, other: CameraTrackingTargetData) -> Self
fn bitor(self, other: CameraTrackingTargetData) -> Self
Returns the union of the two sets of flags.
Source§type Output = CameraTrackingTargetData
type Output = CameraTrackingTargetData
|
operator.Source§impl BitOrAssign for CameraTrackingTargetData
impl BitOrAssign for CameraTrackingTargetData
Source§fn bitor_assign(&mut self, other: Self)
fn bitor_assign(&mut self, other: Self)
Adds the set of flags.
Source§impl BitXor for CameraTrackingTargetData
impl BitXor for CameraTrackingTargetData
Source§impl BitXorAssign for CameraTrackingTargetData
impl BitXorAssign for CameraTrackingTargetData
Source§fn bitxor_assign(&mut self, other: Self)
fn bitxor_assign(&mut self, other: Self)
Toggles the set of flags.
Source§impl Clone for CameraTrackingTargetData
impl Clone for CameraTrackingTargetData
Source§fn clone(&self) -> CameraTrackingTargetData
fn clone(&self) -> CameraTrackingTargetData
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl Debug for CameraTrackingTargetData
impl Debug for CameraTrackingTargetData
Source§impl Default for CameraTrackingTargetData
impl Default for CameraTrackingTargetData
Source§impl<'de> Deserialize<'de> for CameraTrackingTargetData
impl<'de> Deserialize<'de> for CameraTrackingTargetData
Source§fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>where
__D: Deserializer<'de>,
fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>where
__D: Deserializer<'de>,
Source§impl Extend<CameraTrackingTargetData> for CameraTrackingTargetData
impl Extend<CameraTrackingTargetData> for CameraTrackingTargetData
Source§fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
Source§fn extend_one(&mut self, item: A)
fn extend_one(&mut self, item: A)
extend_one
)Source§fn extend_reserve(&mut self, additional: usize)
fn extend_reserve(&mut self, additional: usize)
extend_one
)Source§impl FromIterator<CameraTrackingTargetData> for CameraTrackingTargetData
impl FromIterator<CameraTrackingTargetData> for CameraTrackingTargetData
Source§fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
Source§impl Hash for CameraTrackingTargetData
impl Hash for CameraTrackingTargetData
Source§impl LowerHex for CameraTrackingTargetData
impl LowerHex for CameraTrackingTargetData
Source§impl Not for CameraTrackingTargetData
impl Not for CameraTrackingTargetData
Source§impl Octal for CameraTrackingTargetData
impl Octal for CameraTrackingTargetData
Source§impl Ord for CameraTrackingTargetData
impl Ord for CameraTrackingTargetData
Source§fn cmp(&self, other: &CameraTrackingTargetData) -> Ordering
fn cmp(&self, other: &CameraTrackingTargetData) -> Ordering
1.21.0 · Source§fn max(self, other: Self) -> Selfwhere
Self: Sized,
fn max(self, other: Self) -> Selfwhere
Self: Sized,
Source§impl PartialEq for CameraTrackingTargetData
impl PartialEq for CameraTrackingTargetData
Source§impl PartialOrd for CameraTrackingTargetData
impl PartialOrd for CameraTrackingTargetData
Source§impl Serialize for CameraTrackingTargetData
impl Serialize for CameraTrackingTargetData
Source§impl Sub for CameraTrackingTargetData
impl Sub for CameraTrackingTargetData
Source§impl SubAssign for CameraTrackingTargetData
impl SubAssign for CameraTrackingTargetData
Source§fn sub_assign(&mut self, other: Self)
fn sub_assign(&mut self, other: Self)
Disables all flags enabled in the set.