Enum MavParamError 

#[repr(u32)]
pub enum MavParamError {
    MAV_PARAM_ERROR_NO_ERROR = 0,
    MAV_PARAM_ERROR_DOES_NOT_EXIST = 1,
    MAV_PARAM_ERROR_VALUE_OUT_OF_RANGE = 2,
    MAV_PARAM_ERROR_PERMISSION_DENIED = 3,
    MAV_PARAM_ERROR_COMPONENT_NOT_FOUND = 4,
    MAV_PARAM_ERROR_READ_ONLY = 5,
    MAV_PARAM_ERROR_TYPE_UNSUPPORTED = 6,
    MAV_PARAM_ERROR_TYPE_MISMATCH = 7,
    MAV_PARAM_ERROR_READ_FAIL = 8,
}

Available on crate feature marsh only.

Parameter protocol error types (see PARAM_ERROR).

Variants

MAV_PARAM_ERROR_NO_ERROR = 0

No error occurred (not expected in PARAM_ERROR but may be used in future implementations.

MAV_PARAM_ERROR_DOES_NOT_EXIST = 1

Parameter does not exist

MAV_PARAM_ERROR_VALUE_OUT_OF_RANGE = 2

Parameter value does not fit within accepted range

MAV_PARAM_ERROR_PERMISSION_DENIED = 3

Caller is not permitted to set the value of this parameter

MAV_PARAM_ERROR_COMPONENT_NOT_FOUND = 4

Unknown component specified

MAV_PARAM_ERROR_READ_ONLY = 5

Parameter is read-only

MAV_PARAM_ERROR_TYPE_UNSUPPORTED = 6

Parameter data type (MAV_PARAM_TYPE) is not supported by flight stack (at all)

MAV_PARAM_ERROR_TYPE_MISMATCH = 7

Parameter type does not match expected type

MAV_PARAM_ERROR_READ_FAIL = 8

Parameter exists but reading failed

Implementations

impl MavParamError

pub const DEFAULT: Self = Self::MAV_PARAM_ERROR_NO_ERROR

Trait Implementations

impl Clone for MavParamError

fn clone(&self) -> MavParamError

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for MavParamError

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for MavParamError

fn default() -> Self

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for MavParamError

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl FromPrimitive for MavParamError

fn from_i64(n: i64) -> Option<Self>

Converts an i64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u64(n: u64) -> Option<Self>

Converts an u64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_isize(n: isize) -> Option<Self>

Converts an isize to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i8(n: i8) -> Option<Self>

Converts an i8 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i16(n: i16) -> Option<Self>

Converts an i16 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i32(n: i32) -> Option<Self>

Converts an i32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i128(n: i128) -> Option<Self>

Converts an i128 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_usize(n: usize) -> Option<Self>

Converts a usize to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u8(n: u8) -> Option<Self>

Converts an u8 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u16(n: u16) -> Option<Self>

Converts an u16 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u32(n: u32) -> Option<Self>

Converts an u32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u128(n: u128) -> Option<Self>

Converts an u128 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_f32(n: f32) -> Option<Self>

Converts a f32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_f64(n: f64) -> Option<Self>

Converts a f64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

impl PartialEq for MavParamError

fn eq(&self, other: &MavParamError) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Serialize for MavParamError

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl ToPrimitive for MavParamError

fn to_i64(&self) -> Option<i64>

Converts the value of self to an i64. If the value cannot be represented by an i64, then None is returned.

fn to_u64(&self) -> Option<u64>

Converts the value of self to a u64. If the value cannot be represented by a u64, then None is returned.

fn to_isize(&self) -> Option<isize>

Converts the value of self to an isize. If the value cannot be represented by an isize, then None is returned.

fn to_i8(&self) -> Option<i8>

Converts the value of self to an i8. If the value cannot be represented by an i8, then None is returned.

fn to_i16(&self) -> Option<i16>

Converts the value of self to an i16. If the value cannot be represented by an i16, then None is returned.

fn to_i32(&self) -> Option<i32>

Converts the value of self to an i32. If the value cannot be represented by an i32, then None is returned.

fn to_i128(&self) -> Option<i128>

Converts the value of self to an i128. If the value cannot be represented by an i128 (i64 under the default implementation), then None is returned.

fn to_usize(&self) -> Option<usize>

Converts the value of self to a usize. If the value cannot be represented by a usize, then None is returned.

fn to_u8(&self) -> Option<u8>

Converts the value of self to a u8. If the value cannot be represented by a u8, then None is returned.

fn to_u16(&self) -> Option<u16>

Converts the value of self to a u16. If the value cannot be represented by a u16, then None is returned.

fn to_u32(&self) -> Option<u32>

Converts the value of self to a u32. If the value cannot be represented by a u32, then None is returned.

fn to_u128(&self) -> Option<u128>

Converts the value of self to a u128. If the value cannot be represented by a u128 (u64 under the default implementation), then None is returned.

fn to_f32(&self) -> Option<f32>

Converts the value of self to an f32. Overflows may map to positive or negative inifinity, otherwise None is returned if the value cannot be represented by an f32.

fn to_f64(&self) -> Option<f64>

Converts the value of self to an f64. Overflows may map to positive or negative inifinity, otherwise None is returned if the value cannot be represented by an f64.

impl Copy for MavParamError

impl StructuralPartialEq for MavParamError