Enum MavMountMode 

#[repr(u32)]
pub enum MavMountMode {
    MAV_MOUNT_MODE_RETRACT = 0,
    MAV_MOUNT_MODE_NEUTRAL = 1,
    MAV_MOUNT_MODE_MAVLINK_TARGETING = 2,
    MAV_MOUNT_MODE_RC_TARGETING = 3,
    MAV_MOUNT_MODE_GPS_POINT = 4,
    MAV_MOUNT_MODE_SYSID_TARGET = 5,
    MAV_MOUNT_MODE_HOME_LOCATION = 6,
}

👎Deprecated:

See GIMBAL_MANAGER_FLAGS (Deprecated since 2020-01)

Available on crate feature dialect-storm32 only.

Enumeration of possible mount operation modes. This message is used by obsolete/deprecated gimbal messages.

Variants

MAV_MOUNT_MODE_RETRACT = 0

👎Deprecated:

See GIMBAL_MANAGER_FLAGS (Deprecated since 2020-01)

Load and keep safe position (Roll,Pitch,Yaw) from permanent memory and stop stabilization

MAV_MOUNT_MODE_NEUTRAL = 1

👎Deprecated:

See GIMBAL_MANAGER_FLAGS (Deprecated since 2020-01)

Load and keep neutral position (Roll,Pitch,Yaw) from permanent memory.

MAV_MOUNT_MODE_MAVLINK_TARGETING = 2

👎Deprecated:

See GIMBAL_MANAGER_FLAGS (Deprecated since 2020-01)

Load neutral position and start MAVLink Roll,Pitch,Yaw control with stabilization

MAV_MOUNT_MODE_RC_TARGETING = 3

👎Deprecated:

See GIMBAL_MANAGER_FLAGS (Deprecated since 2020-01)

Load neutral position and start RC Roll,Pitch,Yaw control with stabilization

MAV_MOUNT_MODE_GPS_POINT = 4

👎Deprecated:

See GIMBAL_MANAGER_FLAGS (Deprecated since 2020-01)

Load neutral position and start to point to Lat,Lon,Alt

MAV_MOUNT_MODE_SYSID_TARGET = 5

👎Deprecated:

See GIMBAL_MANAGER_FLAGS (Deprecated since 2020-01)

Gimbal tracks system with specified system ID

MAV_MOUNT_MODE_HOME_LOCATION = 6

👎Deprecated:

See GIMBAL_MANAGER_FLAGS (Deprecated since 2020-01)

Gimbal tracks home position

Implementations

impl MavMountMode

pub const DEFAULT: Self = Self::MAV_MOUNT_MODE_RETRACT

Trait Implementations

impl<'arbitrary> Arbitrary<'arbitrary> for MavMountMode

fn arbitrary(u: &mut Unstructured<'arbitrary>) -> Result<Self>

Generate an arbitrary value of Self from the given unstructured data.

fn arbitrary_take_rest(u: Unstructured<'arbitrary>) -> Result<Self>

Generate an arbitrary value of Self from the entirety of the given unstructured data.

fn size_hint(depth: usize) -> (usize, Option<usize>)

Get a size hint for how many bytes out of an Unstructured this type needs to construct itself.

fn try_size_hint( depth: usize, ) -> Result<(usize, Option<usize>), MaxRecursionReached>

Get a size hint for how many bytes out of an Unstructured this type needs to construct itself.

impl Clone for MavMountMode

fn clone(&self) -> MavMountMode

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for MavMountMode

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for MavMountMode

fn default() -> Self

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for MavMountMode

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl FromPrimitive for MavMountMode

fn from_i64(n: i64) -> Option<Self>

Converts an i64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u64(n: u64) -> Option<Self>

Converts an u64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_isize(n: isize) -> Option<Self>

Converts an isize to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i8(n: i8) -> Option<Self>

Converts an i8 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i16(n: i16) -> Option<Self>

Converts an i16 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i32(n: i32) -> Option<Self>

Converts an i32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i128(n: i128) -> Option<Self>

Converts an i128 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_usize(n: usize) -> Option<Self>

Converts a usize to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u8(n: u8) -> Option<Self>

Converts an u8 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u16(n: u16) -> Option<Self>

Converts an u16 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u32(n: u32) -> Option<Self>

Converts an u32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u128(n: u128) -> Option<Self>

Converts an u128 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_f32(n: f32) -> Option<Self>

Converts a f32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_f64(n: f64) -> Option<Self>

Converts a f64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

impl PartialEq for MavMountMode

fn eq(&self, other: &MavMountMode) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Serialize for MavMountMode

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl TS for MavMountMode

type WithoutGenerics = MavMountMode

If this type does not have generic parameters, then WithoutGenerics should just be Self. If the type does have generic parameters, then all generic parameters must be replaced with a dummy type, e.g ts_rs::Dummy or (). The only requirement for these dummy types is that EXPORT_TO must be None.

type OptionInnerType = MavMountMode

If the implementing type is std::option::Option<T>, then this associated type is set to T. All other implementations of TS should set this type to Self instead.

fn ident() -> String

Identifier of this type, excluding generic parameters.

fn docs() -> Option<String>

JSDoc comment to describe this type in TypeScript - when TS is derived, docs are automatically read from your doc comments or #[doc = ".."] attributes

fn name() -> String

Name of this type in TypeScript, including generic parameters

fn decl_concrete() -> String

Declaration of this type using the supplied generic arguments. The resulting TypeScript definition will not be generic. For that, see TS::decl(). If this type is not generic, then this function is equivalent to TS::decl().

fn decl() -> String

Declaration of this type, e.g. type User = { user_id: number, ... }. This function will panic if the type has no declaration.

fn inline() -> String

Formats this types definition in TypeScript, e.g { user_id: number }. This function will panic if the type cannot be inlined.

fn inline_flattened() -> String

Flatten a type declaration.
This function will panic if the type cannot be flattened.

fn visit_generics(v: &mut impl TypeVisitor)

where Self: 'static,

Iterates over all type parameters of this type.

fn output_path() -> Option<PathBuf>

Returns the output path to where T should be exported.
The returned path does not include the base directory from TS_RS_EXPORT_DIR.

fn visit_dependencies(v: &mut impl TypeVisitor)

where Self: 'static,

Iterates over all dependency of this type.

fn dependencies() -> Vec<Dependency>

where Self: 'static,

Resolves all dependencies of this type recursively.

fn export() -> Result<(), ExportError>

where Self: 'static,

Manually export this type to the filesystem. To export this type together with all of its dependencies, use [TS::export_all].

fn export_all() -> Result<(), ExportError>

where Self: 'static,

Manually export this type to the filesystem, together with all of its dependencies.
To export only this type, without its dependencies, use [TS::export].

fn export_all_to(out_dir: impl AsRef<Path>) -> Result<(), ExportError>

where Self: 'static,

Manually export this type into the given directory, together with all of its dependencies.
To export only this type, without its dependencies, use [TS::export].

fn export_to_string() -> Result<String, ExportError>

where Self: 'static,

Manually generate bindings for this type, returning a String.
This function does not format the output, even if the format feature is enabled.

fn default_output_path() -> Option<PathBuf>

Returns the output path to where T should be exported.

impl ToPrimitive for MavMountMode

fn to_i64(&self) -> Option<i64>

Converts the value of self to an i64. If the value cannot be represented by an i64, then None is returned.

fn to_u64(&self) -> Option<u64>

Converts the value of self to a u64. If the value cannot be represented by a u64, then None is returned.

fn to_isize(&self) -> Option<isize>

Converts the value of self to an isize. If the value cannot be represented by an isize, then None is returned.

fn to_i8(&self) -> Option<i8>

Converts the value of self to an i8. If the value cannot be represented by an i8, then None is returned.

fn to_i16(&self) -> Option<i16>

Converts the value of self to an i16. If the value cannot be represented by an i16, then None is returned.

fn to_i32(&self) -> Option<i32>

Converts the value of self to an i32. If the value cannot be represented by an i32, then None is returned.

fn to_i128(&self) -> Option<i128>

Converts the value of self to an i128. If the value cannot be represented by an i128 (i64 under the default implementation), then None is returned.

fn to_usize(&self) -> Option<usize>

Converts the value of self to a usize. If the value cannot be represented by a usize, then None is returned.

fn to_u8(&self) -> Option<u8>

Converts the value of self to a u8. If the value cannot be represented by a u8, then None is returned.

fn to_u16(&self) -> Option<u16>

Converts the value of self to a u16. If the value cannot be represented by a u16, then None is returned.

fn to_u32(&self) -> Option<u32>

Converts the value of self to a u32. If the value cannot be represented by a u32, then None is returned.

fn to_u128(&self) -> Option<u128>

Converts the value of self to a u128. If the value cannot be represented by a u128 (u64 under the default implementation), then None is returned.

fn to_f32(&self) -> Option<f32>

Converts the value of self to an f32. Overflows may map to positive or negative inifinity, otherwise None is returned if the value cannot be represented by an f32.

fn to_f64(&self) -> Option<f64>

Converts the value of self to an f64. Overflows may map to positive or negative inifinity, otherwise None is returned if the value cannot be represented by an f64.

impl Copy for MavMountMode

impl StructuralPartialEq for MavMountMode