Struct UAVIONIX_ADSB_OUT_DYNAMIC_DATA 

pub struct UAVIONIX_ADSB_OUT_DYNAMIC_DATA {

    pub utcTime: u32,
    pub gpsLat: i32,
    pub gpsLon: i32,
    pub gpsAlt: i32,
    pub baroAltMSL: i32,
    pub accuracyHor: u32,
    pub accuracyVert: u16,
    pub accuracyVel: u16,
    pub velVert: i16,
    pub velNS: i16,
    pub VelEW: i16,
    pub state: UavionixAdsbOutDynamicState,
    pub squawk: u16,
    pub gpsFix: UavionixAdsbOutDynamicGpsFix,
    pub numSats: u8,
    pub emergencyStatus: UavionixAdsbEmergencyStatus,
}

Available on crate feature dialect-ardupilotmega only.

Dynamic data used to generate ADS-B out transponder data (send at 5Hz).

ID: 10002

Fields

utcTime: u32

UTC time in seconds since GPS epoch (Jan 6, 1980). If unknown set to UINT32_MAX

gpsLat: i32

Latitude WGS84 (deg * 1E7). If unknown set to INT32_MAX

gpsLon: i32

Longitude WGS84 (deg * 1E7). If unknown set to INT32_MAX

gpsAlt: i32

Altitude (WGS84). UP +ve. If unknown set to INT32_MAX

baroAltMSL: i32

Barometric pressure altitude (MSL) relative to a standard atmosphere of 1013.2 mBar and NOT bar corrected altitude (m * 1E-3). (up +ve). If unknown set to INT32_MAX

accuracyHor: u32

Horizontal accuracy in mm (m * 1E-3). If unknown set to UINT32_MAX

accuracyVert: u16

Vertical accuracy in cm. If unknown set to UINT16_MAX

accuracyVel: u16

Velocity accuracy in mm/s (m * 1E-3). If unknown set to UINT16_MAX

velVert: i16

GPS vertical speed in cm/s. If unknown set to INT16_MAX

velNS: i16

North-South velocity over ground in cm/s North +ve. If unknown set to INT16_MAX

VelEW: i16

East-West velocity over ground in cm/s East +ve. If unknown set to INT16_MAX

state: UavionixAdsbOutDynamicState

ADS-B transponder dynamic input state flags

squawk: u16

Mode A code (typically 1200 [0x04B0] for VFR)

gpsFix: UavionixAdsbOutDynamicGpsFix

0-1: no fix, 2: 2D fix, 3: 3D fix, 4: DGPS, 5: RTK

numSats: u8

Number of satellites visible. If unknown set to UINT8_MAX

emergencyStatus: UavionixAdsbEmergencyStatus

Emergency status

Implementations

impl UAVIONIX_ADSB_OUT_DYNAMIC_DATA

pub const ENCODED_LEN: usize = 41usize

pub const DEFAULT: Self

pub fn random<R: RngCore>(rng: &mut R) -> Self

Available on crate feature arbitrary only.

Trait Implementations

impl<'arbitrary> Arbitrary<'arbitrary> for UAVIONIX_ADSB_OUT_DYNAMIC_DATA

fn arbitrary(u: &mut Unstructured<'arbitrary>) -> Result<Self>

Generate an arbitrary value of Self from the given unstructured data.

fn arbitrary_take_rest(u: Unstructured<'arbitrary>) -> Result<Self>

Generate an arbitrary value of Self from the entirety of the given unstructured data.

fn size_hint(depth: usize) -> (usize, Option<usize>)

Get a size hint for how many bytes out of an Unstructured this type needs to construct itself.

fn try_size_hint( depth: usize, ) -> Result<(usize, Option<usize>), MaxRecursionReached>

Get a size hint for how many bytes out of an Unstructured this type needs to construct itself.

impl Clone for UAVIONIX_ADSB_OUT_DYNAMIC_DATA

fn clone(&self) -> UAVIONIX_ADSB_OUT_DYNAMIC_DATA

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for UAVIONIX_ADSB_OUT_DYNAMIC_DATA

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for UAVIONIX_ADSB_OUT_DYNAMIC_DATA

fn default() -> Self

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for UAVIONIX_ADSB_OUT_DYNAMIC_DATA

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl MessageData for UAVIONIX_ADSB_OUT_DYNAMIC_DATA

const ID: u32 = 10002u32

const NAME: &'static str = "UAVIONIX_ADSB_OUT_DYNAMIC"

const EXTRA_CRC: u8 = 186u8

const ENCODED_LEN: usize = 41usize

type Message = MavMessage

fn deser(_version: MavlinkVersion, __input: &[u8]) -> Result<Self, ParserError>

Errors

fn ser(&self, version: MavlinkVersion, bytes: &mut [u8]) -> usize

Panics

impl PartialEq for UAVIONIX_ADSB_OUT_DYNAMIC_DATA

fn eq(&self, other: &UAVIONIX_ADSB_OUT_DYNAMIC_DATA) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Serialize for UAVIONIX_ADSB_OUT_DYNAMIC_DATA

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl TS for UAVIONIX_ADSB_OUT_DYNAMIC_DATA

type WithoutGenerics = UAVIONIX_ADSB_OUT_DYNAMIC_DATA

If this type does not have generic parameters, then WithoutGenerics should just be Self. If the type does have generic parameters, then all generic parameters must be replaced with a dummy type, e.g ts_rs::Dummy or (). The only requirement for these dummy types is that EXPORT_TO must be None.

type OptionInnerType = UAVIONIX_ADSB_OUT_DYNAMIC_DATA

If the implementing type is std::option::Option<T>, then this associated type is set to T. All other implementations of TS should set this type to Self instead.

fn ident() -> String

Identifier of this type, excluding generic parameters.

fn docs() -> Option<String>

JSDoc comment to describe this type in TypeScript - when TS is derived, docs are automatically read from your doc comments or #[doc = ".."] attributes

fn name() -> String

Name of this type in TypeScript, including generic parameters

fn decl_concrete() -> String

Declaration of this type using the supplied generic arguments. The resulting TypeScript definition will not be generic. For that, see TS::decl(). If this type is not generic, then this function is equivalent to TS::decl().

fn decl() -> String

Declaration of this type, e.g. type User = { user_id: number, ... }. This function will panic if the type has no declaration.

fn inline() -> String

Formats this types definition in TypeScript, e.g { user_id: number }. This function will panic if the type cannot be inlined.

fn inline_flattened() -> String

Flatten a type declaration.
This function will panic if the type cannot be flattened.

fn visit_generics(v: &mut impl TypeVisitor)

where Self: 'static,

Iterates over all type parameters of this type.

fn output_path() -> Option<PathBuf>

Returns the output path to where T should be exported.
The returned path does not include the base directory from TS_RS_EXPORT_DIR.

fn visit_dependencies(v: &mut impl TypeVisitor)

where Self: 'static,

Iterates over all dependency of this type.

fn dependencies() -> Vec<Dependency>

where Self: 'static,

Resolves all dependencies of this type recursively.

fn export() -> Result<(), ExportError>

where Self: 'static,

Manually export this type to the filesystem. To export this type together with all of its dependencies, use [TS::export_all].

fn export_all() -> Result<(), ExportError>

where Self: 'static,

Manually export this type to the filesystem, together with all of its dependencies.
To export only this type, without its dependencies, use [TS::export].

fn export_all_to(out_dir: impl AsRef<Path>) -> Result<(), ExportError>

where Self: 'static,

Manually export this type into the given directory, together with all of its dependencies.
To export only this type, without its dependencies, use [TS::export].

fn export_to_string() -> Result<String, ExportError>

where Self: 'static,

Manually generate bindings for this type, returning a String.
This function does not format the output, even if the format feature is enabled.

fn default_output_path() -> Option<PathBuf>

Returns the output path to where T should be exported.

impl StructuralPartialEq for UAVIONIX_ADSB_OUT_DYNAMIC_DATA