Struct mavlink::development::UtmDataAvailFlags
source · pub struct UtmDataAvailFlags { /* private fields */ }
development
only.Expand description
Flags for the global position report.
Implementations§
source§impl UtmDataAvailFlags
impl UtmDataAvailFlags
sourcepub const UTM_DATA_AVAIL_FLAGS_TIME_VALID: Self = _
pub const UTM_DATA_AVAIL_FLAGS_TIME_VALID: Self = _
The field time contains valid data.
sourcepub const UTM_DATA_AVAIL_FLAGS_UAS_ID_AVAILABLE: Self = _
pub const UTM_DATA_AVAIL_FLAGS_UAS_ID_AVAILABLE: Self = _
The field uas_id contains valid data.
sourcepub const UTM_DATA_AVAIL_FLAGS_POSITION_AVAILABLE: Self = _
pub const UTM_DATA_AVAIL_FLAGS_POSITION_AVAILABLE: Self = _
The fields lat, lon and h_acc contain valid data.
sourcepub const UTM_DATA_AVAIL_FLAGS_ALTITUDE_AVAILABLE: Self = _
pub const UTM_DATA_AVAIL_FLAGS_ALTITUDE_AVAILABLE: Self = _
The fields alt and v_acc contain valid data.
sourcepub const UTM_DATA_AVAIL_FLAGS_RELATIVE_ALTITUDE_AVAILABLE: Self = _
pub const UTM_DATA_AVAIL_FLAGS_RELATIVE_ALTITUDE_AVAILABLE: Self = _
The field relative_alt contains valid data.
sourcepub const UTM_DATA_AVAIL_FLAGS_HORIZONTAL_VELO_AVAILABLE: Self = _
pub const UTM_DATA_AVAIL_FLAGS_HORIZONTAL_VELO_AVAILABLE: Self = _
The fields vx and vy contain valid data.
sourcepub const UTM_DATA_AVAIL_FLAGS_VERTICAL_VELO_AVAILABLE: Self = _
pub const UTM_DATA_AVAIL_FLAGS_VERTICAL_VELO_AVAILABLE: Self = _
The field vz contains valid data.
sourcepub const UTM_DATA_AVAIL_FLAGS_NEXT_WAYPOINT_AVAILABLE: Self = _
pub const UTM_DATA_AVAIL_FLAGS_NEXT_WAYPOINT_AVAILABLE: Self = _
The fields next_lat, next_lon and next_alt contain valid data.
sourcepub const fn from_bits(bits: u8) -> Option<Self>
pub const fn from_bits(bits: u8) -> Option<Self>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
sourcepub const fn from_bits_truncate(bits: u8) -> Self
pub const fn from_bits_truncate(bits: u8) -> Self
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
sourcepub const unsafe fn from_bits_unchecked(bits: u8) -> Self
pub const unsafe fn from_bits_unchecked(bits: u8) -> Self
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
§Safety
The caller of the bitflags!
macro can chose to allow or
disallow extra bits for their bitflags type.
The caller of from_bits_unchecked()
has to ensure that
all bits correspond to a defined flag or that extra bits
are valid for this bitflags type.
sourcepub const fn intersects(&self, other: Self) -> bool
pub const fn intersects(&self, other: Self) -> bool
Returns true
if there are flags common to both self
and other
.
sourcepub const fn contains(&self, other: Self) -> bool
pub const fn contains(&self, other: Self) -> bool
Returns true
if all of the flags in other
are contained within self
.
sourcepub fn set(&mut self, other: Self, value: bool)
pub fn set(&mut self, other: Self, value: bool)
Inserts or removes the specified flags depending on the passed value.
sourcepub const fn intersection(self, other: Self) -> Self
pub const fn intersection(self, other: Self) -> Self
Returns the intersection between the flags in self
and
other
.
Specifically, the returned set contains only the flags which are
present in both self
and other
.
This is equivalent to using the &
operator (e.g.
ops::BitAnd
), as in flags & other
.
sourcepub const fn union(self, other: Self) -> Self
pub const fn union(self, other: Self) -> Self
Returns the union of between the flags in self
and other
.
Specifically, the returned set contains all flags which are
present in either self
or other
, including any which are
present in both (see Self::symmetric_difference
if that
is undesirable).
This is equivalent to using the |
operator (e.g.
ops::BitOr
), as in flags | other
.
sourcepub const fn difference(self, other: Self) -> Self
pub const fn difference(self, other: Self) -> Self
Returns the difference between the flags in self
and other
.
Specifically, the returned set contains all flags present in
self
, except for the ones present in other
.
It is also conceptually equivalent to the “bit-clear” operation:
flags & !other
(and this syntax is also supported).
This is equivalent to using the -
operator (e.g.
ops::Sub
), as in flags - other
.
sourcepub const fn symmetric_difference(self, other: Self) -> Self
pub const fn symmetric_difference(self, other: Self) -> Self
Returns the symmetric difference between the flags
in self
and other
.
Specifically, the returned set contains the flags present which
are present in self
or other
, but that are not present in
both. Equivalently, it contains the flags present in exactly
one of the sets self
and other
.
This is equivalent to using the ^
operator (e.g.
ops::BitXor
), as in flags ^ other
.
sourcepub const fn complement(self) -> Self
pub const fn complement(self) -> Self
Returns the complement of this set of flags.
Specifically, the returned set contains all the flags which are
not set in self
, but which are allowed for this type.
Alternatively, it can be thought of as the set difference
between Self::all()
and self
(e.g. Self::all() - self
)
This is equivalent to using the !
operator (e.g.
ops::Not
), as in !flags
.
Trait Implementations§
source§impl Binary for UtmDataAvailFlags
impl Binary for UtmDataAvailFlags
source§impl BitAnd for UtmDataAvailFlags
impl BitAnd for UtmDataAvailFlags
source§impl BitAndAssign for UtmDataAvailFlags
impl BitAndAssign for UtmDataAvailFlags
source§fn bitand_assign(&mut self, other: Self)
fn bitand_assign(&mut self, other: Self)
Disables all flags disabled in the set.
source§impl BitOr for UtmDataAvailFlags
impl BitOr for UtmDataAvailFlags
source§fn bitor(self, other: UtmDataAvailFlags) -> Self
fn bitor(self, other: UtmDataAvailFlags) -> Self
Returns the union of the two sets of flags.
source§type Output = UtmDataAvailFlags
type Output = UtmDataAvailFlags
|
operator.source§impl BitOrAssign for UtmDataAvailFlags
impl BitOrAssign for UtmDataAvailFlags
source§fn bitor_assign(&mut self, other: Self)
fn bitor_assign(&mut self, other: Self)
Adds the set of flags.
source§impl BitXor for UtmDataAvailFlags
impl BitXor for UtmDataAvailFlags
source§impl BitXorAssign for UtmDataAvailFlags
impl BitXorAssign for UtmDataAvailFlags
source§fn bitxor_assign(&mut self, other: Self)
fn bitxor_assign(&mut self, other: Self)
Toggles the set of flags.
source§impl Clone for UtmDataAvailFlags
impl Clone for UtmDataAvailFlags
source§fn clone(&self) -> UtmDataAvailFlags
fn clone(&self) -> UtmDataAvailFlags
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moresource§impl Debug for UtmDataAvailFlags
impl Debug for UtmDataAvailFlags
source§impl Default for UtmDataAvailFlags
impl Default for UtmDataAvailFlags
source§impl<'de> Deserialize<'de> for UtmDataAvailFlags
impl<'de> Deserialize<'de> for UtmDataAvailFlags
source§fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>where
__D: Deserializer<'de>,
fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>where
__D: Deserializer<'de>,
source§impl Extend<UtmDataAvailFlags> for UtmDataAvailFlags
impl Extend<UtmDataAvailFlags> for UtmDataAvailFlags
source§fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
source§fn extend_one(&mut self, item: A)
fn extend_one(&mut self, item: A)
extend_one
)source§fn extend_reserve(&mut self, additional: usize)
fn extend_reserve(&mut self, additional: usize)
extend_one
)source§impl FromIterator<UtmDataAvailFlags> for UtmDataAvailFlags
impl FromIterator<UtmDataAvailFlags> for UtmDataAvailFlags
source§fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
source§impl Hash for UtmDataAvailFlags
impl Hash for UtmDataAvailFlags
source§impl LowerHex for UtmDataAvailFlags
impl LowerHex for UtmDataAvailFlags
source§impl Not for UtmDataAvailFlags
impl Not for UtmDataAvailFlags
source§impl Octal for UtmDataAvailFlags
impl Octal for UtmDataAvailFlags
source§impl Ord for UtmDataAvailFlags
impl Ord for UtmDataAvailFlags
source§fn cmp(&self, other: &UtmDataAvailFlags) -> Ordering
fn cmp(&self, other: &UtmDataAvailFlags) -> Ordering
1.21.0 · source§fn max(self, other: Self) -> Selfwhere
Self: Sized,
fn max(self, other: Self) -> Selfwhere
Self: Sized,
source§impl PartialEq for UtmDataAvailFlags
impl PartialEq for UtmDataAvailFlags
source§impl PartialOrd for UtmDataAvailFlags
impl PartialOrd for UtmDataAvailFlags
source§impl Serialize for UtmDataAvailFlags
impl Serialize for UtmDataAvailFlags
source§impl Sub for UtmDataAvailFlags
impl Sub for UtmDataAvailFlags
source§impl SubAssign for UtmDataAvailFlags
impl SubAssign for UtmDataAvailFlags
source§fn sub_assign(&mut self, other: Self)
fn sub_assign(&mut self, other: Self)
Disables all flags enabled in the set.
source§impl UpperHex for UtmDataAvailFlags
impl UpperHex for UtmDataAvailFlags
impl Copy for UtmDataAvailFlags
impl Eq for UtmDataAvailFlags
impl StructuralPartialEq for UtmDataAvailFlags
Auto Trait Implementations§
impl Freeze for UtmDataAvailFlags
impl RefUnwindSafe for UtmDataAvailFlags
impl Send for UtmDataAvailFlags
impl Sync for UtmDataAvailFlags
impl Unpin for UtmDataAvailFlags
impl UnwindSafe for UtmDataAvailFlags
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
source§unsafe fn clone_to_uninit(&self, dst: *mut T)
unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit
)